Sealants
Enamo Grip
Enamo Grip is a tough, medium speed, moisture curing, two component polyurethane enamel, which will provide outstanding resistance to water and humidity, stains, chemicals, and solvents, as well as tremendous scuff, mar, and impact resistance. Ideal for use on bridges applied over Rust Grip® or by itself for complete encapsulation of the metal, providing protection from rust and corrosion for a minimum of 20 years in normal circumstances.
Resistant to hail damage and similar abuses that create opportunities for rust and corrosion. Completely UV-controlled and weather resistant. Enamo Grip can be used on flooring for a tough, long wearing surface. In summary, the overall toughness, durability, of Enamo Grip makes it the ideal choice for architectural maintenance situations that require the utmost in exterior durability. > Learn More >
Rust Grip®
The ultimate for rust and corrosion prevention and long-term protection. Rust Grip® is a one-part polyurethane coating that combines with atmospheric moisture to cure. Upon curing, Rust Grip® provides a protective coating of superior adhesion, flexibility and abrasion/impact-resistance. It is resistant to chemical solvents and acid splash. Originally designed for metal surfaces, Rust Grip® demonstrates excellent adhesion to wood, concrete, fiberglass and many other substrates. Rust Grip® is designed for the encapsulation of and adherence to tightly-bonded surfaces of lead-based and other toxic paints as well as rusted surfaces. > Learn More >
Moist Metal Grip
Moist Metal Grip is a two-part (2 component), touch adherent, epoxy coating which produces a hard, yet flexible coating film designed for application on dry, moist, wet or submerged surfaces for protection against corrosion and chemicals. Moist Metal Grip is white in colour and was developed to be applied to metal surfaces that cannot be dry enough to use Rust Grip® or already experiencing moisture or condensation that cannot be stopped and dried. Can withstand mild acid and caustic solutions and be submerged (good for water treatment plants). Learn More >
Lining Kote
Acids and caustics, not all tested but concentrations as high as 65% and under water or under solution. Protect against the harshest acids, bases, chemicals and solvents with Lining Kote UHS. For solutions containing hydrochloric (muriatic) acid. Lining Kote is a two-part pigmented epoxy coating, which will produce a hard, tough coating film. Designed to for use on the interior of tanks, this epoxy coating was built to resist the toughest acid, chemical or solvent environments.
Lining Kote has outstanding adhesion and can withstand direct impact. It is resistant to water, humidity and high heat. Lining Kote is made with a high molecular weight base and cure for strength and durability. Lining Kote is used to prevent corrosion and deterioration of interior walls. In general, Lining Kote has the best long-term, concentrated acid resistance.
Waterbased
SP Interlock
SP Interlock is a water borne sealant / preservative specifically for conditioning concrete structures to solve the damaging problems caused by water, freeze / thaw, acids, caustics, bacteria, salt erosion, oils, juice penetration, “toxic black mould”, algae, mammal excrement, and other such pollutants.
It solves problems resulting from dusting, algae formation, soft concrete, loss of strength, spalling, sulfate and nitrate degradation, saponification (causes vinyl tiles, paint, polyurethane and epoxy coatings to peel off) or simple efflorescence (ordinary concrete disintegration). Used to seal concrete flooring, walls, blocks, pipes or other concrete substrates. > Learn More >
