Urban Heat Island Insulation Coatings banners NEOtech Coatings

Summer Comfort Rating

Researchers at the University of Melbourne modelled six common apartment designs in the city and all six failed standards for new buildings set in France, the UK, Germany and the US. There are no health standards to ensure against heat stress in the Building Code of Australia.

Lead researcher and construction scientist Mr Chris Jensen, from the Melbourne School of Design, said the results are a wake-up call given the risk of heatwaves. He says it’s time Australia catches up with other countries to adopt similar standards for new buildings, and he says action is needed to encourage the retrofitting of existing buildings.

There are no health standards to ensure against heat stress in the Building Code of Australia

He suggests that just as all buildings have energy ratings, the government could introduce “summer comfort” ratings on apartments to reduce heat stress for occupants and incentivise owners to upgrade their buildings.

“The research highlights to the public that heat stress inside apartments is a real issue and that we need to do more to control for this, not only in new buildings, but also for existing buildings,” says Mr Jensen. “It isn’t a new problem, but climate change science expects more frequent and possibly longer heatwaves, so the health risk is only going to increase.

“What we need to be concerned about are existing apartment buildings that lack air conditioning and are susceptible to overheating, but we also need to be concerned about most buildings should a heat wave coincide with a power black out which would eliminate all air-conditioning.”

Such an “event” is far from fanciful given the blackouts that hit South Australia in February 2017 and warnings of possible load shedding in Sydney during the recent NSW heatwave.

France introduced “summer comfort” standards after the 2003 heatwave there estimated to have caused over 14,800 deaths, with the elderly particularly vulnerable. The French standards require that without the use of air conditioning, building design should ensure that temperatures inside rooms don’t exceed 28 degrees for more than 3 per cent of the year – equivalent to 260 hours.

The researchers modelled how six common Melbourne apartment designs could cope with excessively high temperatures by testing them against the heatwave conditions that hit Melbourne in January and February 2009, which included the Black Saturday bushfire disaster of 7 February. That heatwave included three straight days when the temperature topped 43 degrees, while nighttime lows exceeded 25 degrees. They also chose a worst-case scenario by modelling west-facing apartments that are most exposed to the sun. All six sample apartments failed the four international standards they were tested against.

“We modelled both old and new apartment designs, including an example of a recent and best practice design, so it is fair to say that most other west-facing apartments in Melbourne would fail these international standards under these conditions, and quite possibly those in other orientations,” Mr Jensen says.

“As a priority we need to introduce into the building code our own ‘summer comfort’ standards that are tailored to our own climate, and simultaneously efforts to retrofit buildings to reduce over heating need to be prioritised on high risk cases.” He said such high risk cases include west facing apartments with lots of glass and buildings where vulnerable people such as the elderly may be housed.

To improve existing buildings, the study found the easiest and most effective strategies for apartments include:

Looking to join one of the world’s leading coatings companies. Contact us if you’re a quality applicator looking for new products and markets!